XRF Products

image4

WD-XRF

Supermini200

Compared to competing XRF systems, the Rigaku Supermini200 offers superior fundamental parameters and empirical software capabilities in a high resolution instrument with a compact footprint. As a high-power benchtop sequential wavelength dispersive X-ray fluorescence (WDXRF) spectrometer, for elemental analysis of oxygen (O) through uranium (U) in almost any material, the Supermini200 uniquely delivers low cost-of-ownership (COO) with high resolution and lower limits-of-detection (LLD).

Product Details

Elemental analysis of oxygen to uranium

Compared to competing XRF systems, the Rigaku Supermini200 offers superior fundamental parameters and empirical software capabilities in a high resolution instrument with a compact footprint. As a high-power benchtop sequential wavelength dispersive X-ray fluorescence (WDXRF) spectrometer, for elemental analysis of oxygen (O) through uranium (U) in almost any material, the Supermini200 uniquely delivers low cost-of-ownership (COO) with high resolution and lower limits-of-detection (LLD).


WDXRF performance with low costs

Not only is the Rigaku Supermini200 spectrometer an affordable choice for your XRF elemental analysis needs, the running costs are also low. P10 gas for the flow proportional detector is the only consumable. The Supermini200 does not require a source of cooling water, plumbing, or an external chiller, thereby decreasing system maintenance and lowering the overall lifetime cost of ownership of the system and yearly budgets for consumables and maintenance.


WDXRF for light element performance

Analyzing complex matrix materials with a wide range of light and heavy elements, from trace to high concentration levels, is this instrument’s core competency. With its high powered (200 W) X-ray tube, Rigaku Supermini200 delivers high XRF sensitivity for light elements with superior spectral resolution for resolving line overlaps in complex matrices without the need for complicated mathematical peak deconvolution. Analyzing low concentration levels of light elements (F, Na, Mg, Ca, Si, Al, and P) is easy.


Highest resolution for difficult samples

Supermini200 WDXRF spectrometer is equipped with a three position crystal changer where LiF(200) and PET are mounted as standard crystals. RX25 or Ge can be added optionally, with the RX25 providing exceptionally high resolution for peaks from oxygen through magnesium.


Features

  • Analyze oxygen through uranium (O → U)
  • Analyze: solids, liquids, powders, alloys and thin films
  • Atmosphere: air, helium or vacuum
  • X-ray tube: 50 kV, 200 W Pd-anode
  • Primary beam filter: Zr is standard; Al optional
  • Detectors: F-PC and scintillation
  • Crystals: 3-position changer
  • Autosampler: 12-position standard
  • Vacuum: rotary pump standard
  • Power: 100 – 120V (50/60 Hz) 15A or 200 – 240V (50/60 Hz) 10A

ZSX PrimusIII+

image5

Rigaku ZSX PrimusIII+ delivers rapid quantitative determination of major and minor atomic elements, from oxygen (O) through uranium (U), in a wide variety of sample types — with minimal standards.


Tube above optics for superior reliability

ZSX PrimusIII+ features an innovative optics-above configuration. Never again worry about a contaminated beam path or down time due to sample chamber maintenance. The optics-above geometry eliminates cleaning worries and increases up time.



High precision sample positioning

The high precision positioning of the sample ensures that the distance between the sample surface and X-ray tube is kept constant. This is important for applications that require high precision, such as the analysis of alloys. ZSX PrimusIII+ performs high-precision analysis using a unique optical configuration designed to minimize errors caused by non-flat surfaces in samples such as fused beads and pressed pellets



SQX fundamental parameters with EZ-scan software

EZ-scan allows users to analyze unknown samples without any prior setup. This time saving feature requires only a few clicks of the mouse and a sample name to be entered. Combined with SQX fundamental parameters software, it provides the most accurate and rapid XRF results possible. SQX is capable of automatically correcting for all matrix effects, including line overlaps. SQX can also correct for secondary excitation effect by photoelectrons (light and ultra-light elements), varying atmospheres, impurities and different sample sizes. Increased accuracy is achieved using matching library and perfect scan analysis programs.

Features

  • Analysis of elements from O to U
  • Tube above optics minimizes contamination issues
  • Small footprint uses less valuable lab space
  • High precision sample positioning
  • Special optics reduce errors caused by curved sample surfaces
  • Software tools for statistical process control (SPC)
  • Evacuation and vacuum leak rates can be optimized for throughput

Site Content

image6

ZSX Primus IV

As a tube-above sequential wavelength dispersive X-ray fluorescence (WDXRF) spectrometer, the new Rigaku ZSX Primus IV delivers rapid quantitative determination of major and minor atomic elements, from beryllium (Be) through uranium (U), in a wide variety of sample types — with minimal standards.

Product Details

As a tube-above sequential wavelength dispersive X-ray fluorescence (WDXRF) spectrometer, the new Rigaku ZSX Primus IV delivers rapid quantitative determination of major and minor atomic elements, from beryllium (Be) through uranium (U), in a wide variety of sample types — with minimal standards.

New ZSX Guidance expert system XRF software

New ZSX Guidance supports you in all aspects of XRF measurement and data analysis. Can accurate analysis only be performed by experts ? No — that is in the past. ZSX Guidance software, with the built-in XRF expertise and know-how of skilled experts, takes care of sophisticated settings. Operators simply input basic information about samples, analysis components and standard composition. Measured lines with the least overlap, optimum backgrounds and correction parameters (including line overlaps) are automatically set with aid of qualitative spectra.


Exceptional light element XRF performance with inverted optics for superior reliability

ZSX Primus IV features an innovative optics-above configuration. Never again worry about a contaminated beam path or down time due to sample chamber maintenance. The optics-above geometry eliminates cleaning worries and increases up time. Providing superior performance with the flexibility for analyzing the most complex samples, the ZSX Primus IV WDXRF spectrometer features a 30 micron tube, the thinnest end-window tube available in the industry, for exceptional light element (low-Z) detection limits.
<h3>Mapping and multi-spot XRF analysis


Combined with the most advanced mapping package to detect homogeneity and inclusions, the ZSX Primus IV allows easy detailed XRF spectrometric investigation of samples that provide analytical insights not easily obtained by other analytical methodologies. Available multi-spot analysis also helps to eliminate sampling errors in inhomogeneous materials.


SQX Fundamental parameters with EZ-sca software

EZ-scan allows users to perform XRF elemental analysis of unknown samples without any prior setup. This time saving feature requires only a few clicks of the mouse and a sample name to be entered. Combined with SQX fundamental parameters software, it provides the most accurate and rapid XRF results possible. SQX is capable of automatically correcting for all matrix effects, including line overlaps. SQX can also correct for secondary excitation effect by photoelectrons (light and ultra-light elements), varying atmospheres, impurities and different sample sizes. Increased accuracy is achieved using matching library and perfect scan analysis programs.

Have you opened a new location, redesigned your shop, or added a new product or service? Don't keep it to yourself, let folks know.

Features

  • Analysis of elements from Be to U
  • ZSX Guidance expert system software
  • Digital multi-channel analyzer (D-MCA)
  • EZ Analysis interface for routine measurements
  • Tube above optics minimizes contamination issues
  • Small footprint uses less valuable lab space
  • Micro analysis to analyze samples as small as 500 µm
  • 30μ tube delivers superior light element performance
  • Mapping feature for elemental topography/distribution
  • Helium seal means the optics are always under vacuum